HMC500 horizontal machining center
HMC500 horizontal machining center
HMC500 horizontal machining center
HMC500 horizontal machining center
HMC500 horizontal machining center
HMC500 horizontal machining center

Item specifics

Numerical control
Control method
Semi-closed loop control
Three axis
Roller linear guideway



Product Introduction


Strong Rigidity High productivity Horizontal Machining Center

  • 50


  • 3


  • 6K


  • 24


HMC500 Strong Rigidity and High productivity Horizontal Machining Center

HMC series is featuring high rigidity, heavy cutting ability and high operability. The strong base column construction has optimally-placed ribs to counter chatter and twisting during heavy cutting. With 3 axes roller linear guideway and wide area motor, this vertical machining center can perform heavy cutting and high speed machining with high torque from low to high speed.

PDF download

Product Detailed Parameters

Machine Model : HMC500

working size500 x 600mm
Max. load capacity600kg
X travel1050mm
Y travel750mm
Z travel900mm
Spindle nose taperBT540 
Spindle speed (pulley)6000rpm
Rapid traverse rate30/30/30m/min
Number of tools24T

Product Details Map

Machine Structure:

All the machine parts adopted finite element analysis

“M” type cross supporter ,the base weight more than 4000Kg

Spindle :

Standard machine with spindle house oil cooling system to reduce heat distortion during working and keep the stable machining accuracy. 

Spindle bearings are three supporter type and six pairs, the dia Φ90mm,high rigidity and rotating accuracy. 

Spindle front section with “air window” to protect bearings and increase life span.

Tool Magazine :

Standard: BT50 , 24 position Arm type tool magazine are made by OKADA/POJU who is Professional tool manufacturers in Taiwan. 

Optional: Chain type 40T tool magazine.

Axes Driving :

TOP TAIWAN brand Ball screw & linear guideway

 Double nuts C3 level grinded ball screws.Screw diameter* pitch: 40*12/40*12/50*12

Roller type linear rails for three axis.The rail size and model: RGW45/RGH45/RGW55.Three axis Slide load block quantity: 4/4/4.

Three Automatic chip conveyors :

Two screw type conveyor to move the chips from inside machine to outside chain type conveyor during working, and the outside chip conveyor transfer the chips to chips tank. 

The whole process is smoothly and high efficiency to clean the chips, reduce the machine body heat, escape from machine body heat distortion.

Physical Picture